Description

A Celebration of Contrast

The Eclipse knob features a high-profile dome of solid natural walnut wood, securely cradled within a precision-edged brushed brass rim. This design emphasizes depth and curvature, offering a substantial, smooth grip that brings organic warmth to the touch. The golden metal cup acts as a sophisticated frame, elevating the simple wooden form into a piece of fine jewelry for your furniture.

• Type: Cabinet Knob

• Finish: Brushed Brass with Walnut Inlay

• Installation: Single-Hole

• Dimensions:

  • Standard: Head Ø 1-9/64″ (approx. 1.14″)

• Material: Solid Brass & Natural Walnut Wood

• Recommended For: Cabinet Doors & Drawers

• Installation Kit: Included (Mounting screws provided)

Ideal for:

• Adding depth to flat-panel kitchen cabinetry

• Restoring mid-century modern dressers

• Bathroom vanities requiring a warm, tactile touchpoint

• Interiors that balance earthy textures with metallic shine

A rounded, robust detail that softens the lines of modern joinery.

Installation Guide

Tools Needed

• Phillips Screwdriver (Cross-head)

• Power Drill

• Drill Bit: 3/16" (5mm) recommended (allows for slight adjustment) or 5/32" (4mm) for a tight fit.

• Measuring Tape or Ruler

• Pencil & Masking Tape (for marking without damaging the surface)

• Level (essential for handles & pulls)

Screw Sizing Chart

Determine the correct screw length based on your cabinet door thickness.⚠️ IMPORTANT ORDERING NOTE: Standard 1" (25mm) screws are included by default, as they fit most standard cabinet doors. If your door thickness requires a different screw length from the chart above, please specify the required size in the order notes (e.g., "Need 35mm screws") when placing your order.

Installation Steps

STEP 1: MEASURE & MARK

• Hold the hardware against the cabinet door or drawer to visualize the placement.

• Use masking tape on the door surface (to protect the finish) and mark the screw hole locations with a pencil.

• Tip: For handles/pulls, use a level to ensure they are perfectly straight.

STEP 2: DRILL PILOT HOLES

• Double-check your measurements.

• Drill straight through the marked points using a 3/16" (5 mm) drill bit.

• Important: Keep the drill perpendicular (90° angle) to the door surface to avoid angled screw entry.

STEP 3: INSERT SCREWS

• Insert the included mounting screws from the inside (back) of the cabinet door or drawer.

• Push them through until they protrude slightly from the front.

STEP 4: TIGHTEN & ADJUST

• Align the handle or knob with the screws on the front.

• Tighten securely with a Phillips screwdriver.

• Caution: Do not over-tighten with a power drill, as this may strip the threads or damage the cabinet finish.

💡 Pro Tips

• Wide Drawers: For drawers wider than 30 inches, we recommend installing two pulls (positioned at 1/3 and 2/3 width) for a balanced load and smoother operation.

• Positioning:

  • Slab Doors: Center the hardware vertically or place it in the corner.

  • Shaker Doors: Align the hardware on the center of the vertical rail (frame).

• Consistency: If installing multiple pieces, creating a template (jig) out of cardboard is highly recommended to ensure every handle is at the exact same height.

What’s Included

• Hardware piece × quantity ordered

• Mounting screws (matching quantity ordered, in two lengths for different panel thicknesses)

• Protective packaging to prevent scratches during transit

• Installation guide (digital or printed)

All screws automatically match the quantity of hardware pieces in your order.

Warranty

Your JOLEE HOME hardware is crafted to last.
We stand behind each piece with a 1-Year Limited Warranty, ensuring lasting beauty and reliable performance in everyday use.

Covered under warranty:

• Manufacturing defects

• Finish integrity under normal care

• Mechanical stability and threaded components

Not covered:

• Wear from improper installation or over-tightening

• Damage from chemical cleaners, abrasives, or moisture exposure

• Use in commercial or industrial environments

If you ever encounter an issue, we are here to help.
Reach out with your proof of purchase, and our team will arrange a prompt replacement or support solution.

Shipping and Returns

Shipping

Processing: 1–3 working days
Shipping Time: 4–15 working days
Total Delivery: 5–18 working days

U.S. Shipping Rates:

• <$100: $6

• $100–$200: $10

• $200–$300: $16

• >$300: Free Shipping

Remote areas (Guam, Puerto Rico, Hawaii) may require extra fees.

Returns (30 Days)

• Return new & unused items within 30 days.

• We cover return shipping for defective / wrong items.

• Customer covers return shipping for all other reasons.

Start a return: support@joleehome.com